Tuesday, March 1, 2016

'Til all are one

I'll admit it. My eight-year-old self shed a tear in the theater when Optimus Prime died. Despite having seen death in action movies and Japanese anime, I don't think any onscreen death had impacted me before.

I've been working on this project for a while and only needed Hot Rod to complete the shot. I suppose I could have used Masterpiece Rodimus Prime, but figured it would be worth it to wait. Mastermind Creations Azalea is standing in for Arcee, but everyone else is a Masterpiece figure. I think I may have mistakenly used Spike instead of Daniel.

The ground is a shot of my Mechanical Chain Base Panels, with a Cutout Filter Gallery applied and then a blue to grey gradient overlayed.

The table is an accessory from one of the Mechanical Chain Base sets. I applied a Saturation Layer to change its color and transformed it to increase its size.

Optimus Prime was shot standing up, but from a low angle. After doing a lot of work to him, I realized I had not closed his Matrix chamber. Oh well. Besides covering up screws and applying a dim eye glow, I used a Craquelure Filter Gallery to give him that battle damaged look. I also brushed on some smudges to his abdomen.

The Matrix, Hot Rod, Ultra Magnus, Azalea, and Daniel were all shot separately and dropped into the scene. Daniel required the most cleaning up because of sloppy paint work and seams at his joints. I used a Dry Brush Filter Gallery to further hide his imperfections, which had been further accentuate by the Canon 500D Close-up lens I had used.

Hot Rod was shot with my Canon 70D. I still haven't figured out how to get clean white backgrounds with that camera. Despite that, he was easy to cut out because of the much sharper edges afforded by the better camera. I did have to cut out his left leg and transform it because the original perspective would have interfered with Ultra Magnus.

Because of the angle of the ground to the figures, all the shadows were easily created using Drop Shadows Layer Styles. I pushed the shadows to their own layers because I needed some to change directions, like where Optimus shadow goes from the table to the ground to Hot Rod.

Now I just need someone to make a Masterpiece Kup so I can do the next shot from this scene.

Direct link - https://drive.google.com/open?id=0Bwxl1QbH6hwVT3R5WDZkOGFZSms


https://www.facebook.com/lapstransformersphotos/
https://www.instagram.com/laptutran/
https://www.flickr.com/photos/19429167@N02/albums


Friday, February 26, 2016

Our jet judo needs a little more work

This was a simple project to try out my new camera. I've been using a Panasonic FZ-200 bridge camera previously. Now I'm using a Canon 70D. My workflow needs some modifying. Although I haven't figured out how to do the white background easily with the Canon, the figures are still very easy to extract because the edges are so much sharper.

Masterpiece Sideswipe, Badcube Sunsurge, and the parachute accessory from Mastermind Creations Sphinx were all shot separately. I used layer masks to place the parachute ropes in the figures' hands. The parachute itself was the most difficult thing to photograph because it kept wanting to return to a flat shape. The sky was shot on a cloudy summer evening, using a Hoya FLW filter. A final Warming Photo Filter was used to tie all the colors together.

Got Masterpiece Hot Rod incoming. That can only mean trying to recreate a couple of iconic scenes with him as I try to learn how to shoot with the Canon.

Direct link - https://drive.google.com/file/d/0Bwxl1QbH6hwVUkMtbjFlaktnM2c/view?usp=sharing


https://www.facebook.com/lapstransformersphotos/
https://www.instagram.com/laptutran/
https://www.flickr.com/photos/19429167@N02/albums


Friday, February 19, 2016

More Than Meets the Eye - Hound vs Rumble

Although this multi-part episode has two scenes where Hound tosses Rumble, I wanted to try some new techniques so chose the underwater scene.

I shot Maketoys Gundog on some Toyhax desert tile stages. The rocks in the foreground and background were cut and pasted in from some shots I had taken at Fitzgerald Marine Reserve. Masterpiece Rumble was added in using layer masks so I could get one leg in front and one leg in back of Gundog. He's a bit on the small side so I had to scale him up a bit. There were a lot of plastic flash and paint blemishes to cover up.

The Filter Gallery actually has an Ocean Ripple filter, but I found the Canvas Glass filter to provide the effect I wanted. It's not quite perfect, but close enough. This resulted in a lot cleaning up around the edges of the figures though. I also added a dark blue overlay to darken the scene.

Unfortunately, Photoshop hiccuped or something. Although I was saving constantly, after I did an export and closed down the app, I couldn't find my project file. I searched the entire disc for it, and it's not in the Recently Opened list. I'll just have to recreate it. More practice I guess.

Direct link -
https://drive.google.com/file/d/0Bwxl1QbH6hwVR2hDRzczZnhFaGM/view?usp=sharing


https://www.facebook.com/lapstransformersphotos/
https://www.instagram.com/laptutran/
https://www.flickr.com/photos/19429167@N02/albums


Sunday, February 14, 2016

So much for your resurrection!

I must admit that my recollection of Seasons 3 and 4 are spotty at best. Thank goodness for DVDs. Now I can go through all the episodes for scenes to recreate.

I photographed Masterpiece Optimus Prime and DX9 Tyrant separately. This made it easier to scale them with each other in the scene. There wasn't much needed doing except to clean up some screw holes on both figures. Posing Tyrant was a compromise between getting the angle that I wanted while keeping his face from being blocked by his shoulder pylons.

The purple background is a photo of my Mechanical Chain Base panels after running it through a Sprayed Strokes Filter Gallery. I don't have a pile of junk to photograph so I used a castle piece from a board game. The little item in the foreground is the Immobilizer accessory that comes with Masterpiece Exhaust. All were run through a Blur Filter and had Saturation Layers applied to change their colors.

Direct link - https://drive.google.com/file/d/0Bwxl1QbH6hwVUFhUMEdjcHk0MEU/view?usp=sharing


https://www.facebook.com/lapstransformersphotos/
https://www.instagram.com/laptutran/
https://www.flickr.com/photos/19429167@N02/albums


Thursday, February 11, 2016

Auto Beserk

This turned out to be a lot more involved than I had originally thought. I took separate shots of Masterpiece Optimus Prime and Red Alert, Maketoys Hellfire, and Generations Hoist. This was necessary because Hellfire's arms aren't long enough to hold Red Alert in that position.

Red Alert's legs were pasted into position from two separate shots, one for each leg, because he can't actually bend into the position that I needed and to prevent a robot up-skirt shot. I used those odd brushes to apply the scorch marks. I had mispositioned Optimus Prime's arm for the shot so had to resort to cutting and pasting it into a new angle.

The sky is a shot of cloudy summer evening.

Direct link - https://drive.google.com/file/d/0Bwxl1QbH6hwVRmdpQ0dWZFZHdlU/view?usp=sharing


https://www.facebook.com/lapstransformersphotos/
https://www.instagram.com/laptutran/
https://www.flickr.com/photos/19429167@N02/albums


The Golden Lagoon

The little birds that come with X-Transbots Arkose are not really that detailed and don't match the ones in this particular scene, but they are close enough. I took a shot of him with the white bird balanced on his hand. The other two birds were taken from a different shot of them pegged into his shoulders. I simply cut them out and dropped them into the final scene. The sky was from a cloudy summer day. I applied a cooling filter to the whole scene to unify the color scheme.

Direct link - https://drive.google.com/file/d/0Bwxl1QbH6hwVTE5Nd24zanBjb2c/view?usp=sharing


Saturday, February 6, 2016

Such Heroic Nonsense

For me, this scene removed any doubt that four of our favorite Autobots would be rejoining the fight later in the movie.

To get the source picture, I had to stitch together a couple of screen captures because it was a pan up from Ironhide to Megatron. There are a few floating around the Internet, but I wanted a higher resolution capture of it.

Ironhide was a simple shot of him kneeling. I drew on the cracks in his back and used one of those dotted brushes to simulate electrical sparks in the hole in his back.

Megatron was a little trickier. X-Transbots Apollyon, as much as I enjoy the figure for all its G1 likeness, is a pain to pose and shoot. His arms are constantly falling off. I really should take the time to apply some floor polish to those shoulder joints. He was shot in a lying position, using Haywire from Unique Toys Buzzing to help prop up his cannon arm. The angles are not exact, but I'm satisfied with it.

Once again, the ceiling is my trusty set of Mechanical Chain Base panels. I applied a Hue/Saturation layer to get the orange color. The darker area was achieved by applying a second Hue/Saturation layer. The lights and Apollyon's cannon glow are an Inner/Outer Glow layer style with the shapes painted on with a brush. I created the blue screen by running a blue square through a Grain Texture filter, then drawing on some lines.

Direct link - https://drive.google.com/file/d/0Bwxl1QbH6hwVZTRGaUt1WWh3QWM/view?usp=sharing


https://www.facebook.com/lapstransformersphotos/
https://www.instagram.com/laptutran/
https://www.flickr.com/photos/19429167@N02/albums


Starscream's Triumph

Starscream's Triumph It's my interpretation of the scene where Starscream and Bruticus best Megatron. Zeta Toys Armageddon stood i...